Burner MG Series: Methan-Diesel dual fuel

The IBSR MG series industrial burner is a DUAL-BLOCK type burner powered both with NATURAL GAS, METHANE or LPG (liquid propane gas) and with DIESEL 2°E at 20°C,thanks to dual fuel technology. This feature increases the already high flexibility, allowing you to choose the type of fuel and thus obtain a considerable economic saving.

In addition, thanks to the variety of combustibles used, it can achieve high performances in terms of efficiency, energy saving and low environmental impact: the low emissions are one of the main features of this methane and diesel burner that make it one of the best solution in terms of reduction of NOx emissions and optimization of combustion processes. The high performances obtained are the result of the use of innovative techniques in its implementation, as the electronic cam, and the high-tech of all the components that constitute it.

The technology is also at the forefront in terms of the remote management of this methane and oil burner: all burner’s data, parameters and operating cycles can be monitored remotely through a web interface that is accessible via personal computer (PC) and also via latest generation of mobile devices such as tablets, smartphones, iPhone and iPad.

Due to its high flexibility, which allows its use in many industries, IBSR MG series DUAL-BLOCK industrial burner powered with methane gas and diesel fuel has a wide range of applications: from food industry to textiles, light and heavy industry to pharmaceuticals; it also can be installed in other types of productive system like furnaces or asphalt plants.

For more information about burner’s performances and emissions contact our Technical Office.

 

MAIN FEATURES

  • Capacity from 4,700 kW to 50,000 kW
  • Electronic cam for optimum combustion
  • Robustness: use of pickled steel sheet
  • Register to adjust flame’s geometry
  • Low NOx emissions
  • Versatility: great for asphalt and special plants
  • CE certified
  • Possible implementation to obtain an operating range 1:10
  • Possibility of tele-monitoring and tele-management of burner’s operation kits
  • Possibility, on request, of higher powers.

 

TECHNICAL FEATURES

The IBSR MG series DUAL-BLOCK industrial burner, powered with NATURAL GAS, METHANE or LPG but also with DIESEL 2°E at 20°C(dual power)and equipped with electronic cam technology, is composed of:

  • painted steel structure with inspection cover
  • pipe flame
  • ignition transformer
  • ignition cables
  • photocell
  • glass window for flame’s visual inspection
  • electronic servomotor for air regulation’s damper
  • electronicic servomotor for fuel adjustment.

All servomotors are completed of joint and link bracket.

 Diesel circuit includes:

  • control valve with electronic servomotor
  • solenoid locking magnet with diodes bridge rectifier and varistor
  • protection carter
  • inlet / return / valve flexible metal hoses
  • lance complete with telescope
  • spindle
  • diffusor disk
  • premixed pilot with air by the fan with reduction gears to adjust the flow rate; if inverter is required, air premixed will be compressed
  • register with blades assembled with adjustable opening on the rear plate of the burner to regulate flame’s geometry.

 

APPLICATIONS

IBSR MG series industrial burner can be used in different industrial sectors and it is suitable for the installation in plants producing hot/overheated water or steam principally with fire tube steam boilers. Examples of application can be find below.

Food industry:

  • Dairy
  • Coffee processing factory
  • Distilleries

Textiles:

  • Tanneries
  • Thread-making factory

Industrial sector:

  • Asphalt  plants
  • Incinerators
  • Steam-powered plants
  • Energy plants (heating and similar)
  • Paper mills
  • Cement plants

Chemical / pharmaceutical